Wolverine Dressing Jig
ONEWAY's Dressing Attachment provides the Turner with a simple and
exact tool for the precision dressing and truing of grinding wheels.
Grinding wheels must be dressed to keep them sharp and clean. Grinding wheels, like
sandpaper, become dull with use; the grit breaks down and becomes dull. If grinding wheels
are not sharp, they begin rubbing rather than cutting, which results in increased
friction. Higher temperatures and burned tools are the result. Wheels must also be kept
free from metal particles that build up during sharpening. Like sandpaper that gets
clogged with sawdust during sanding, grinding wheels become clogged with metal particles
Our Dressing System consists of a Support Arm, and a sturdy Holder in which the Diamond
Premium ¼ carat non-resettable Diamond
Click here to download the Dressing Jig
instructions in PDF format.
The Support Arm slides into the WOLVERINE Grinding Jig base. The Holder is mounted into
the Support Arm. A fine adjustment knob positions the diamond in relation to the wheel.
Dressing the wheel in the required 0.001" increments is easily accomplished by
turning the knob by one quarter turns. Only minimal care is needed for even finer
ONEWAY's Dressing system is the only dresser on the market that allows
controlled removal of this minute amount of material. Because the ONEWAY Dresser removes
such small amounts from your grinding wheels, they will last much longer. Expensive wheels
become a better investment.
After dressing with the ONEWAY Wheel Dresser your wheels will be round, clean, and
sharp. They will cut faster, cooler and finer. You will get a better finish on tools than
anything you have ever experienced. Your tools will have sharper edges, smoother bevels,
and all this will be done with less burning.
The diamond provided with the WOLVERINE dressing attachment is a premium 1/4 carat
non-re-settable diamond. The sharp angular structure will be retained if properly used. It
is expensive, but the best.
For optimal performance, the diamond should be turned in its holder at regular
intervals - a good target is to turn it after 10 or more uses.
- Diamond (included with the dressing jig) Part No. 2295