TAME YOUR GRINDER!
reduce vibration with ONEWAY's Balancing System. Your grinding wheels can finally be
accurately balanced by you in your own workshop!
Sharpening tools can be difficult for many reasons. One problem can occur
because grinding wheels are sensitive to vibration due to their mass and speed. Often
vibrations are responsible for inferior finishes on the tools that are being ground. They
can also harm the bearings and bearing housings of the machine. Most vibrations are caused
by unbalanced grinding wheels.
Unfortunately, bench or pedestal grinders do not come
equipped with a means to balance wheels.
ONEWAY's balancing operation compensates for:
- out of round wheels
- wheel density
- thickness side to side variation of the wheel
Balanced wheels will give better grinding performance. Once completed, rebalancing
should not be necessary for the life of the wheels. You will get better grinding
performance needed to get sharp tools for better finishes on your turning projects.
Wheels, bearings, and bearing housings will last longer. Your machine will make less
noise. Finishes on your tools and projects will be improved with less effort.
All our balancing fixtures will fit wheels with a thru hole of dia. 1" and
1¼" with the standard spacers included.
½" Balance System
5/8" Balance System
¾" Balance System
Balance fixture, left hand flange, right hand flange
spacer washers (2), dowel pin, screws (14)
Be sure to specify your grinder's spindle size when ordering.
Click here to view/download the Instruction
Manual for this product.